The PADI TecRec Range – When One Tank Is Not Enough!

The TecRec Range

Surface

Technical diving is scuba diving’s “extreme sport”, taking experienced and qualified divers far deeper and further than in mainstream recreational diving. Technical diving is marked by significantly more equipment and training requirements to manage the additional hazards this type of diving entails. Tec diving isn’t for everyone, but for those who want to be explore further, the TecRec courses are the answer.

Diver Levels

Most of the names of the courses in TecRec range include a number (eg Tec 40). This is an indication of the maximum depth in metres intended for a diver certified at this level. As a general rule, each course includes four dives. 

Discover Tec

This short session allows divers to give technical diving a try. It does not result in a certification, but lets a diver experience wearing the extra gear involved in technical diving and understand the rationale behind it.

Tec 40

The entry point into the technical range, Tec 40 provides a transition from recreational to technical diving. Although the use of full tech gear (doubles and wings) is preferred, it does allow modified use of recreational gear in some situations, provided the diver has two separate regulators, with one of the first stages fitted with a long hose. Double and single rigs

(For example, a main cylinder and pony cylinder combination). The intended working limit for a diver at this level is 40 metres/130 feet with up to 10 minutes of non-accelerated decompression. They may use any EANx mix with up to 50% oxygen content or air. To enrol on the course, a diver must be the equivalent of a PADI Advanced Open Water diver, with an EANx Diver rating and have deep recreational diving experience.

Tec 45

The diver must use full ‘standardised’ tech rig, including wings and doubles plus an additional deco cylinder (note that side mounted cylinders are an acceptable alternative to back mounted doubles throughout the TecRec range). The course allows the diver to go to 45 metres/145 feet and make accelerated decompression dives using any mix of EANx or pure oxygen. A diver must have the equivalent of a Tec 40 rating to enrol on this course.

Tec 50

This course represents a high level of competency for a technical diver. Although the option exists to make the last dive of the course using trimix, it is intended as an air/nitrox rating and by the end the diver can dive to a maximum of 50 metres/165 feet and make extended, accelerated decompression dives.

Tec Trimix 65

This course opens up the advantages of trimix to the diver, and divers are qualified to make multi-stop decompression dives that employ EANx and oxygen for accelerated decompression, using any trimix with an oxygen content of 18% or more. They can dive to a maximum depth of 65 metres/210 feet.

Tec Trimix

Trimix Divers

This course lets the diver go deeper, opening up the option of using travel gases and trimix with less than 18% oxygen content. Dives made during the course can be as deep as 90 metres/300 feet. Once qualified, the diver can start to explore deeper; for this reason there is no numbered suffix after the course title as in the rest of the range — there are no limits placed on how deep the diver can go after training, providing they build their experience gradually.

Gas Blender

Cylinders

The Gas Blender rating certifies the holder to mix enriched air or trimix for divers to use in recreational or technical diving operations. Courses for this level are conducted by Gas Blender Instructors.

 

Leave a Reply

Your email address will not be published. Required fields are marked *