Oceanic Professional Program – Up To 30%

Oceanic Professional Discount

You’re a professional diver, and you depend on your equipment when teaching, guiding or working.

Oceanic and Hollis recognises the commitment and effort you make towards the industry and wants to reward you with discounted equipment.

You can select from a wide range of products from Oceanic & Hollis, including regulators, bcds, wings, sidemount and drysuits. You can select multiple items across different groups. We’ll even give you free service parts for life and register your product for you.

How does it work?

1. Download the application form below

2. Select which products you want; one from each category, complete your details

3. Send us the form and we’ll ship your product to your choosen Oceanic dealer.

4. Visit your local Oceanic dealer, pay for your product and collect them.

The Professional application form is available for download from here.

Remember: this promotion runs for the duration of 2013 and is open to all renewed Professionals in the UK industry, including Divemaster / Dive Leader and above. Full details of the process are available in the application form above.

Get Fit For Scuba, Are You Serious? Why?

After about 30 years of age, life gives each of us an important choice: use it or lose it.

Those of us who choose to “use it” can maintain or even increase our fitness levels for decades.  The rest of us fail to provide our bodies with enough activity to stave off the debilitating influence of Father Time.

For example:

• Our fitness potential peaks in our mid-30s, then gradually declines until we have no need for it, at the point when you get a free wooden overcoat :0)

• The average person gains about 1 kilo per decade starting at age 20 if no exercise is taken.

As we live with our body’s every minute of every day you don’t really see how significantly your body changes, until one day we wake up and suddenly realize that the ‘pot belly’ has grown to a state that you find it difficult to pull up your socks!

Does this mean that diving becomes automatically riskier as we age?  No.

Scuba diving is usually described as a moderate level activity. Scuba diving by itself does not lend itself to the maintenance of physical fitness.

In most cases scuba diving is a seasonal sport and as such our ‘scuba fitness’ follows suit. Every year I hear people saying after their first dive of the season “I really need to get scuba fit”.

For those divers who already pursue a program of physical fitness, well done!

To keep a year long fitness regime is not easy. In the summer you want to enjoy the sun and getting fit is not that attractive. In the winter the weather is miserable and does not provide you much incentive the ‘get out’ and ‘get fit’.

In both cases the draw of easy food in the form of fast food, comfort food, pub grub and drinks with friends can just be too much of a temptation. Especially with the high stress lifestyles that people lead these days.

Life also often throws a spanner in the works here and there. I certainly feel the aches and pains more these days now that I am over 40!

Over the last decade since I stepped over the 30 years of age mark I have been keeping fit on and off. I have seasons where for whatever reason I train like a madman to the tune of ‘Eye of The Tiger’ blaring in the background.

I have tried all sorts of keeping fit. From boot camps, joining a gym, running, yoga, squash, Zumba and many more.

They all have one thing in common for me, they get boring, repetitive and I loose interest at some point. That was until I found Crossfit!

Since joining the brand new Crossfit gym in Maidenhead (http://www.crossfitmaidenhead.com/index.php) I found a new lease of life and a place that provides the same atmosphere as diving, a group of friendly people that get together, have a great time and get fit as a result.

The crossfit instructors are there at each session to make sure you are ‘working at your best’ and the other crossfitters help to keep each other going.

Why Fitness?

I believe it is important for divers to have a ‘good’ level of fitness. Becoming physically fit, will in turn can help to prevent illness, injury and just improve general well being.

For me, being physically fit provides me with benefits such as:

  • Improved transportation of oxygen to muscles
  • Helps reduces the amount of air used
  • This in turn would help extends dive time
  • Increased physical endurance helps reduce fatigue
  • Reduces the risk of decompression sickness (DCS)
  • Improves agility
  • Improves comfort and movement on the surface and underwater
  • Improves muscle efficiency and diving performance
  • Helps you to maintain a healthy weight range

Gas Exchange

VO2max is the most relied upon benchmark of both cardiovascular fitness and effective decompression.  While the average person experiences a 10% decline in VO2max per decade, recent studies suggest that maintaining high activity levels can halt this decline entirely.

Heart stroke volume decreases with age, along with a decrease in the capillary-to-muscle fibre ratio and arterial cross-sectional area.  This means that less blood is flowing to the peripheral tissues (fewer capillaries), and the speed with which gasses cross into the bloodstream is reduced (which is a function of vessel cross-sectional area).  Thus, tissue off-gassing is slowed, and oxygen is less effective at accelerating the decompression process.

That said, an active 65 year old has a higher level of cardiovascular function than a sedentary 30 year old.  This difference can come from pursuing 30 minutes of focused exercise every day- hardly the schedule of an elite athlete. 

Muscle and Bone

Absolute muscle remodelling rates slow down with age.  However, even 90 year olds experience the same relative increases in strength and endurance as younger adults.  One study showed that men in their 70s who strength trained starting in their 50s had muscle size and strength equivalent to the 28 year-old researchers.

Training to achieve maximum peak bone mass when younger may reduce the effects of age and inactivity later.  This is known as the “bone battery” concept.  In other words, the higher the maximum bone density you achieve, the longer it will take for aging to lower that density below a safe threshold.  This is regardless of genetic predisposition to degenerative diseases like osteoporosis.

Flexibility often decreases with age but can be improved with stretching.  Again, the percentage gains achieved from a consistent stretching program remain the same across age groups.

Well I hear you say, that is great had I know all of this at the time!

It’s Never Too Late To Consider Your Fitness, You Only Get One Chance As Life Is Not A Rehearsal!

There is no age at which exercise is bad for you, whether you’re just getting started or have been doing it your whole life.  There are no exercises that are unsafe based purely on age, either.  A 70 year old can follow the same program as a 30 year old with adjusted baseline parameters, correct coaching and advice.

Everyone should discuss with a suitably trained individual about their exercise programs, though even with significant health issues like diabetes, high blood pressure, coronary artery disease, etc., almost anyone can safely increase their activity with proper guidance.

If you do have a known condition then please don’t just jump in at the deep end and go and seek the advice of a physician.






Gas Analysers – How Important?

Probably nothing is more important to divers than their breathing gas. Whether they use compressed air, nitrox or some exotic mix, having sufficient breathing gas ranks high on divers’ predive checklists. But just as important as the quantity of gas is its quality. While breathing gas contamination is considered rare in recreational diving, it does happen. Even trace amounts of contamination can lead to incapacitation, unconsciousness or even death.

Contamination of breathing gas takes a variety of forms and can be caused by a wide spectrum of conditions. The most common cause of breathing gas contamination involves the compressor system. In other cases, contamination can occur right in a diver’s cylinder. Improper gas mixtures can also be considered a form of contamination.

While there are quality standards compressed breathing gases must meet, divers should still take responsibility for ensuring the quality of their own gas. Happily, there are several options available to divers when it comes to analyzing gas mixtures.

The Sniff Test

Perhaps the simplest technique of air quality analysis is the “sniff test,” wherein the diver opens the valve and smells the escaping gas to detect suspicious odors. This crude test is effective to the extent that gross contamination in the form of oil, diesel fumes and other combustion products can sometimes be detected by odor and/or taste. However, since carbon monoxide (CO) is both colorless and odorless, breathing gas can pass the sniff test and still be contaminated by CO. A more accurate solution to analyzing is the use of a portable sensor.

CO Detectors

Color-change sensors are often used for measuring CO levels and include both qualitative and quantitative devices. Qualitative devices use a color-change element that gives divers a go/no-go indication. Be aware, though, the color change indicates only that the air sample exceeded acceptable contamination limits; it doesn’t indicate by how much. Quantitative color-change sensors use a small pump to draw a measured quantity of air (usually 50 cc’s) through a calibrated color-change tube. The CO in the air sample reacts chemically with the sensor material in the tube, causing it to change color. A scale on the side of the tube measures how much chemical has changed color and reports the actual concentration of CO.

Electronic CO-monitoring devices subdivide into two categories: metal-oxide detectors and electrolytic detectors. Metal-oxide detectors utilize sensors containing, not surprisingly, metal oxide. In the presence of CO, the metal oxide gives up its oxygen, changing to a pure metal and generating heat in the process. The amount of temperature change can be correlated to the CO level in the sample, and the result is displayed by the device.

Electrolytic CO detectors work like tiny batteries, with platinum electrodes dipped in an electrolyte. The presence of CO increases the generation of electrical energy, which can be correlated to the concentration of CO. These are perhaps the most sensitive and accurate types of CO sensors, but they are also more expensive and use more power to operate.
When choosing a CO monitor, give careful thought not only to price, but also to the type of diving you enjoy and the logistics of taking the measurements.

The growing popularity of nitrox has undoubtedly done a lot to improve the state of oxygen-monitoring technology for divers. Though the gas analyzers commonly seen in dive shops and on dive boats are often called “nitrox analyzers,” it’s equally accurate to call them “oxygen sensors,” as what these tools are really monitoring is the level of oxygen in a given nitrox gas mixture. Probably the most common type of oxygen sensor uses a galvanic fuel cell that generates a weak electrical current proportional to the concentration of oxygen. Although monitors using this technology can usually measure oxygen content to within a 0.1 percent margin of error, they can be fooled. The monitor may provide a reading in “percent oxygen,” but it is actually measuring the partial pressure of oxygen. Change the pressure, and the oxygen reading changes, too.

A simple to use accurate oxygen analyser is essential in these modern times.

A simple to use accurate oxygen analyser is essential in these modern times.

Changes in temperature will also affect the rate of the chemical reaction in the fuel cell and, consequently, the reading of the monitor. While nitrox analyzers typically have temperature-compensation circuitry, problems can arise when a cold monitor is suddenly taken into warm conditions or vice versa. Always allow your nitrox analyzer to reach ambient temperature and calibrate the monitor to a known standard, typically compressed air at 21 percent, before putting it into action.

Yet another problem that divers should be aware of is poor sampling technique. If the monitor is not properly used to make sure it is reading only the gas coming from the cylinder, it might be measuring a diluted mixture of ambient gas as well as the gas coming from the nitrox cylinder. Always read and follow the manufacturer’s instructions to ensure you’re getting accurate results.

Maintenance Matters

Taking proper care of your gas-analyzing equipment is of critical importance. Always store your analyzers in a cool, dry place. Avoid rough handling and exposure to seawater and other wet conditions. Analyzers usually require a power source, so make certain yours is fresh. When on the road, spare batteries can be a lifesaver. Remember that many sensors have a limited life, so track the time and use of your analyzer, and carry a spare when traveling. Of course, dive operations and liveaboards that offer nitrox will have their own sensors. Whether you choose to use your personal nitrox analyzer or use those on location, understanding the concept and the proper use of gas analyzers will help to make you a safer diver.

Bad gas is not a likely hazard for recreational divers, but the consequences of undetected contamination can be a serious matter. By using portable gas analyzers, divers can limit the risk and enjoy a greater level of safety while diving.

Know the Symptoms

NOTE: If you experience any symptom associated with gas contamination, abort the dive and exit the water. 

General contamination: Contamination of breathing gas can come in a variety of forms. Some of the most common symptoms are an oily taste, oily smell or other foul odor.

Carbon monoxide poisoning: The most common symptoms of CO poisoning are headache, dizziness, weakness, nausea, vomiting, chest pain and confusion. High levels of CO in the breathing gas can cause loss of consciousness and death. Unless suspected, CO poisoning can be difficult to diagnose because the symptoms are common to a larger spectrum of maladies.

Oxygen toxicity: The most common symptoms of central nervous system (CNS) oxygen toxicity include tremors, ringing of the ears, nausea, tunnel vision and seizures.


Information talen from Alert Divers Online

BCD Maintenance – Top Ten Tips

I have a mantra when it comes to purchasing Scuba diving equipment, “buy right and buy once”. Sound advice, especially when it comes to life support equipment.

Purchasing a BCD is one of the most expensive components most recreational scuba divers will make. It is also one of the most overlooked pieces when it comes to cleaning and maintenance.

BCD's fare an important part of your scuba equipment

BCD’s fare an important part of your scuba equipment

It’s a common occurence to stand next to someone suiting up for a dive, look at their BCD and see “salty crud” stuck to the outside. You can only imagine what infestation lives inside of it. This “lack of maintenance” is not only financially fool-hearty, it is also a safety issue. There are many components of a BCD that need to be clean and well maintained in order to properly and safely execute a dive. Think about it, nothing scares me more than a stuck inflator button and a rusty low pressure inflator hose that needs to be disconnected in a hurry before an uncontrolled ascent.

Some tips to keep your gear in good working order:

1. Have a professional Scuba technician maintenance your BCD regularly and at least according to the specifications outlined by the manufacturer.

2. Make sure it fits correctly and you are properly trained in using the equipment.

3. Disconnect all hoses after finished diving. Inspect and clean all hoses including the corregated hose for damage, cuts, slices, and splits. Remove and inspect weight pockets. If velcro weight pockets, then inspect velcro and clean with toothbrush. Don’t leave any dirt in the velcro. If they are locking weight pockets, make sure they snap back into the BCD with a loud snap. Weak snaps may mean a loose connection. In either case, make sure pockets release easily – but not too easily. Remove all knives and empty pockets. Clean independent of BCD.

4. Soak outside of BCD in fresh water after every day of diving. The longer the better, but don’t get crazy.

5. Fill BCD with water and air. Rinse the inside thoroughly. Shake vigorously with air and water inside the bladder. Repeat at least twice.

6. Make sure water runs through the Inflator Valve (inflate BCD with water and air and empty through inflator valve by holding the hose low and deflating). Use toothbrush to scrub around the inflator and deflator buttons. Repeat at least twice.

7. Fill bladder up with air and fresh water. Use dump valves to empty bladder. Make sure fresh water runs through dump valves. Remove and inspect dump valves. Look for rust on springs. Replace if rusty.

8. Inflate Bladder to full. Hold underwater. Inspect seams of bladder for leaking air. If leaking air, bring to Scuba Technician.

9. Hang Dry. Do not lie on the concrete floor.

10. When Dry, inspect thoroughly. Look for salt stains or dirt. If you find them, spot clean or repeat completely.

Side-Mount, The Way Forward?

Hollis, leading the field in side-mount diving

Hollis, leading the field in side-mount diving

More recreational divers are discovering the advantages of sidemount scuba cylinders.

Historically, sidemount diving was for extreme, technical divers who used the configuration to penetrate small sections of caves. But its adaptability and advantages have been discovered by divers of varied experience levels, and that, coupled with advances in equipment and greater availability of training, has made sidemount diving an increasingly common application. It’s not just for cave divers anymore.

Sidemount is a gear configuration in which a diver wears a tank on each side of his body instead of mounted on his back. Sidemount tanks lie parallel to the body, below the shoulders and along the hips. Since the tanks are not connected by an isolation manifold, as they are in a backmount configuration, the diver has two separate and redundant sources of gas and will breathe first from one tank and then the other, switching back and forth between two independent regulators throughout the dive. The clips on the bottom of the tanks are attached below the hip, and the top of the tank is secured with a bungee system, which allows the tanks to ride along the side.

The advantages of sidemount diving first resonated with advanced and technical divers who realized that wearing tanks on the side of the body created a lower profile in the water than traditional backmounted tanks, thereby allowing access to, and the exploration of, small spaces without disturbing the environment. Less silt equaled greater access. Wreck divers discovered they could push a tank ahead of them into a small hatchway by simply unclipping the bottom portion of the tank from the buttplate. Cave divers saw the same benefits when working their way through low, overhead passageways. Reef divers, too, implemented sidemount diving to improve the navigation of tight coral canyons while hopefully reducing unintentional coral contact.

But whether diving a wreck, cave or reef, every specialty recognized the safety benefits of sidemount diving. A sidemount configuration gives a diver easier access to tank valves in an emergency. Some divers carry sidemount “bailout bottles” specifically for this purpose. Sidemount rigs make it easier when divers need to swap out extra tanks staged along a tagline or the floor of a basin. The position of the tanks also gives the diver’s head greater range of motion for enhanced vision and comfort.

One final advantage for sidemount enthusiasts is simply the management of what can be a heavy load. Considering the average technical rig weighs approximately 130 lbs., it’s easy to see the appeal of a system that allows for the placement of tanks in the water ahead of the diver, allowing him to enter the water in nothing more than a basic harness system. The tanks then clip in, but with the weight burden significantly reduced through buoyancy. Of course, when the dive is done the process is easily reversed, allowing divers to exit the water with the same ease. Older divers and petite women are two dive demographics increasingly embracing sidemount diving for these very reasons.

Sidemount configurations are proving a good fit with the increasing popularity of rebreather diving. Because of the cluttered front presented by rebreather hardware, the sidemounted “bailout bottles” provide an unobtrusive way to carry an emergency air supply. The sidemount tanks also provide a ballast of sorts, creating a more streamlined profile and manageable center of gravity.

To Train Or Not To Train

Like all forms of specialized diving, divers should seek training to learn about sidemount diving. Experienced technical divers already accustomed to gas management and dealing with multiple cylinders and the rule of thirds will likely figure out how to sidemount with the help of a good workshop emphasizing the ergonomics of the system. Even then, it will likely take quite a few dives to balance the rig just right and to make the operation intuitive. Every diver must decide if these adjustments are a puzzle to solve on his own or a special skill set to hone with the help of an instructor.
Divers who are not technically trained yet want to get started in advanced diving with sidemount should take a structured course. Proper training will include removing a bottle underwater and swimming while pushing the tank in front of the body, donning tanks while floating at the surface, air sharing, gas management and deploying a surface marker. Working with an instructor will help the diver configure the finer nuances of the rig, set up the tanks properly and make sure the trim is correct in-water. Courses are typically run over two days.

Divers should choose an instructor who is familiar with their intended dive environment. There are differences between sidemounting from a boat or a cave or a wreck, and the best instruction is scenario-specific. Divers come in a variety of shapes and sizes with a variety of needs; ensure your instructor is knowledgeable on the various sidemount options and can teach you what you need to know.

How To Choose

There are dozens of sidemount rigs on the market; the diversity can be bewildering. As with all diving equipment, it’s important to define your own needs and fit your unique body type. What works for one diver won’t necessarily work for another, so do some homework before buying.

To find the rig that works best, a potential sidemount diver needs to do a thorough assessment of his dive environment and understand how personal body type and buoyancy characteristics affect a rig. Don’t try to squeeze custom needs into a “one-size-fits-most” configuration. What are your rig lift needs? Do you need your rig to be easily adaptable, or do you need one highly specialized for a specific environment? A cold-water diver may wear heavy steel tanks and need a rig designed for that environment, including a wing with enough lift for the tanks, materials that are cold-water friendly and adjustment points that can be handled with thick gloves. Cave divers in Florida may need something entirely different, and deep wreck divers off New Jersey may require something else again.

Pay attention to safety features: Do they meet the needs of your dive environment? If you plan to sidemount from a boat, you should make sure your rig is designed with the proper safety clips in case you have to enter or exit the water with the tanks attached to your harness. (This can happen when a boat encounters rough seas and transporting the tanks one at a time, unattached to the diver, can be difficult or dangerous. Rather than stress or snap the bungee system, the diver uses the clip located on the neck of the tank to clip into something more robust, like a harness D-ring.)

Divers planning to squeeze into restricted spaces with protrusions need to pay attention to the placement of the inflation hose and bungee system, along with other potential snag points. A buttplate tucked beneath a wing would be a potential problem, and the inflation hose should have a protective sleeve and a low profile. A continuous, one-piece bungee system is not necessarily considered the safest alternative; the prevailing trend these days is two separate bungees. That way if one bungee is sheared, you won’t lose control of both tanks. Keep in mind that safety and redundancy in advanced diving is critical.

Both recreational and technical certification agencies now offer sidemount training, making it easier to find an instructor. More and more sidemount divers are seen on boats and at dive sites; as part of your due diligence, ask their opinion on why they choose to sidemount and what safety features are critical to the dive environment. There’s a wealth of information eagerly disseminated amongst those early adapters of the equipment. For while it’s not necessarily mainstream just yet, sidemounting has definitely come out of the cave and into the light of day.

© Alert Diver — Summer 2010

Spare Air Important Notice

May  2013

Dear Spare Air Dealer:

Spare Air cylinders are now CE marked.  Spare Air owners with cylinders manufactured between 1999-2012 with DOT-3AL markings should return their cylinder to the UK Distributor for replacement.  This is not a safety issue, but a marking issue.  See address below.




EX14 4RB


Submersible Systems, Inc. is the proud manufacturer of Spare Air & Heed 3 emergency breathing devices.  Since 1979 we’ve distributed over 250,000 units worldwide.  Visit www.submesiblesystems.com for more information about our products and company.

For further questions email the manufacturer at info@submersiblesystems.com

Introducing The All New Website

It has been a good few weeks in the planning and development but we are proud of the results!

We wanted to shake things up for 2013 and decided a good image overhall was a great place to start.

The site is now much easier to navigate and packed full of great information and offers. We still have our online shop to sort but that is already under construction.

I hope you agree the slide show in the middle of the main page really brings to life the Malta Holiday we have running in April (13th – 20th), the Red Sea Holiday on the amazing Sea Serpent (4th – 11th October).

There is nothing like having that sun and warm water to look forward too!

Highlights include the unique PADI UK Speciality bundle that saves you over £300 and the recently launched PADI UK Dry Speciality bundle providing even more savings and the opportunity to complete some amazing dry speciality courses during these winter months.

So please, pop onto the new website and let me know what you think.

5 Easy Steps for Maintaining Your Reg

A modern regulator is an extremely reliable mechanism. So reliable, in fact, that some divers will take their regs on countless dives and never so much as rinse them off. Yet they keep on delivering air year after year.
While this is indeed the modus operandi for the maintenance-challenged individuals among us, the truth is, a regulator is a pretty hefty investment, and when you spend that much on something it kinda makes you want to take care of it. We’re not talking a major commitment here; we’re talking a few minutes after each day of diving following some simple steps to help extend the life and performance of what is really the most important component of your life support system.

This is all it takes:

1. After a day’s diving, making sure the dust cover is in place, give the reg a quick rinse with a low-pressure hose to knock off any big chunks of dirt, sand or salt.

2. Drop the reg in a bucket of fresh water or the bathroom sink and let it soak for 10 minutes or so.

3. During the soak, swish the second stage around in the water (without depressing the purge button) to get water flowing through the mouthpiece and exhaust tee.

4. Pull the reg out of the water and give it another gentle rinse, making sure you hit all swivels and hose connections. This will require pulling back the hose protectors—if your reg has them—so you can get at the connections to the first stage.

5. Give the first stage and second stage a gentle shake to clear any excess water from the yoke and the exhaust tee. Then lay it loosely coiled out of direct sunlight to dry.


(Reference taken from http://www.scubadiving.com/training/basic-skills/5-easy-steps-maintaining-your-reg)

Balanced vs Unbalanced Regs: Does It Make a Difference?

One of the features mentioned in ScubaLab’s regulator tests is whether the first and/or second stages are “balanced.” In recent years, the terms “overbalanced” and “hyperbalanced” have popped up as well, adding to the sometimes confusing mix of features to evaluate before choosing a regulator. We won’t get into detailed technical aspects, and this explanation doesn’t cover every reg in the market, but here’s a simplified explanation.

Balanced First Stage
It’s all about the springs when discussing the difference between balanced and unbalanced first stages. With both piston and diaphragm regs, there’s a high-pressure valve and seat assembly and a spring. An unbalanced reg basically has a different pressure on each end of this valve-spring assembly that causes varying effort to overcome the force of the spring as conditions change — such as change in depth or tank pressure. This translates as variations in the medium pressure traveling through the hose to the second stage, resulting in harder breathing effort at depth or low tank pressure. A balanced first stage routes medium pressure air to both sides of the valve-spring assembly, so that the effort to move the spring is consistent and unaffected by variations in external conditions, giving the diver unvarying pressure to the second stage and consistent breathing effort.

Over-Balanced First Stage
This is a bit of technical wizardry performed by some manufacturers allowing a first stage to slowly increase its medium pressure output as ambient pressure increases (you’re going deeper) instead of keeping it constant. The advantage is that the relative volume of air supplied to the second stage is greater as you go deeper, theoretically making breathing easier. A nice bonus on those deep wreck dives.

Balanced Second Stage
In oversimplified terms, a typical second stage has at its heart a valve and a spring, much like the first stage. When a diver inhales on a regulator, the inhalation effort opens a valve that is closed by the tension of a spring. Balancing a second stage is accomplished by routing medium pressure air to the backside of the valve to help counteract the force of the spring. This allows the valve to open with less effort, making the reg breathe easier under heavier demand, such as the higher pressures at depth.

The Bottom Line
If balancing makes things so much easier for the diver, why isn’t every regulator manufactured that way? One reason is cost. If you open a reg and look inside, the parts are tiny and precision made. Balancing adds a layer of complexity to the manufacturing process that translates into higher cost. Another reason is that not everyone needs a balanced regulator. As our tests prove, an unbalanced system can perform very well in entry-level diving scenarios. Purchasing a balanced first stage paired with an unbalanced second stage can often provide a good balance of performance at a reduced cost to the budget-conscious diver.

(reference article taken from http://www.scubadiving.com/balanced-vs-unbalanced-regs-does-it-make-difference)

Happy New Year To You From DiveStyle!

A massive Happy New Year from all of us at DiveStyle.

The sun is shinning and it is a glorious first day for 2013.

2012 has been a long and rocky road with much of the news being doom and gloom, but guess what? We are all still here!

DiveStyle will be taking 2013 by the scruff of the neck and making this year a year to remember.

We have trips planned every month and holidays planned to Malta and the Red Sea.

If you fancy coming along for the ride then please feel free.

No matter what you undertake this year we wish YOU the success that YOU are looking for.